Clover-setup

For details on how to access this please contact First Data. Still need help? Contact Us Contact Us. Step 1: Unbox and Set Up Plug in the Hardware Take the plastic off of the Clover terminal Plug the charger into the dock, plug the charger into the power outlet preferably a power bar, one power slot is required Insert printing paper into the Clover. Do this by popping open the back, take the paper out of the black wrapper, remove the tape from the roll of paper.

Insert it as per the instructions on the inside of the Clover. Put the Clover on the dock Turn on the Clover by Pressing and holding the button on the right hand side Follow the on screen instructions in order to set up the device.

Please note you will need the activation codes from your payment processor, without the activation codes you cannot complete the set up. Step 2: Download the Cloud Pay app on the Clover terminal Please follow the steps below to download the app: Once on the home screen of the Clover, Click on the More Tools app, if you have a Clover Mini the app may be called App Marketplace Note: you must be logged in to the Clover with admin permissions to be able to install the app from the app market.

Once it is open you will be in "transaction mode". When in transaction mode you should see a black screen with your company's: name, branding, or logo. If you do not do this you are not in transaction mode and will not be able to do transactions.

Please press and hold the Cloud Pay app on the menu screen. Thanks a lot. I have exactly the same issue. Kudos to Rebel! Omg I wish I saw your post much earlier spent all week-end figuring out. IAPhysicalMedia Any information what this file is for and why it was causing boot loader to choke?

Thank u so much! In earlier versions, there were no such problems when creating the usb boot disk. Anyway, it works smoothly with the apfs file system. I also found the same explanation as Rebel say for that in tonymacx86 site. The problem started to happen with version I got as far as the clover boot screen, then hit enter, and everything goes black. If so, nothing that new will work. I think you might need Also, USB3. I appreciate the guides. Any suggestions? Install Clover 2. Can you do step 3 after the install is complete?

I accidentally selected the wrong option and completed the install before disabling APFS conversion. Hello, I have a Dell Latitude E with an Intel Core i5 M, I start the process ok, but when it finish loading in the apple logo it shows a negative icon. My sound works right away but after making or try alterations, becomes less glitchy but still glitchy enough that my audio from my HDMI goes out.

No graphics card, just the CPU. Been trying to get this to work for roughly 2 months or so after failing to attempt the unibeast rout to just to get into the installation.

This has more information on vi minstallconfig. I mounted and copied the EFI folder as per instructed. When I click it to install, its not seeing my Install OS or something because it wants to connect to the server.

Should I just continue with the download or did I do something wrong earlier? I hope someone gets back to you Carlos — I have the exact same problem: everything seemed to be going fine up to the point when I use Disk Utility to create the partition on the drive I want to install OS X on, but when i close Disk Utility i then only have the option to reinstall MacOS but not a fresh install.

The boot part is smooth and fine, but i cannot install mac os due to the problem above….. The version of High Sierra I downloaded is Thanks for the guide! The Apple logo appears, progress bar goes halfway, then I get the prohibited sign circle with slash and it stays there it occasionally flickers briefly as if it decided either to refresh or try again and just shows that sign again.

I followed these instructions exactly to remove the APFS from my boot drive. When getting into Multibeast I began to attempt to install the correct drives that you recommend, but it gave me the install failed error. Checked the multibeast. Any help would be greatly appreciated. Hey i cannot get network to work. My router is an Airport Extreme, my computer is plugged directly into it.

My other mac mini plugged over ethernet to the same router has no issues. No issues with other devices on wifi either. Not sure if this has anything to do with it. I tried installing the kexts post install and nothing worked, whereas the kexts DID work using the other method but graphics were jacked.

After install is finished. I went to a non-Apple repair shop but the technician told me that the logic board must be the problem and the only fix is to replace it. The price quote I got for the motherboard is more expensive than what I actually paid for my secondhand MBA. It would be impractical for me to spend more on the replacement, so this really is not an option. I used the internet recovery to install the OS in my flash drive.

I installed light programs like Office for Mac, Chrome and Goofy. I also tried upgrading to High Sierra before installing the programs but with no success, because it cannot detect any SSD in the primary bay there was none to detect. It worked well and I basically had my machine up and running. I was not able to do a research on Hackintosh and Clover Manager beforehand.

It was taking so long that I thought it was already stuck up. I did a hard reset by turning it off. Then repeated 1. With my MBA not booting how can I possibly do this? My EFI firmware is unlocked i. It has been two days since my MBA is in a coma and I have been sleepless switching between reading forums and waking my machine up.

I hope someone can shed some light on this and suggest possible solutions. Thank you in advance. I completed this guide successfully on integrated graphics.

When trying to post install the rx I got stuck at every boot with a weird bug happening, where the screen starts flickering and shows random colors plus the fan stop LED lights up on the RX I decided to reinstall on a different drive with the card plugged in from the start.

Everything worked until step 5. The first boot resulted in the same exact bug I previously had. The bug even appears when the card is just plugged in but the BIOS is set to igfx and the monitor is connected to the mobo.

Can you help? Please help! Your GeForce m might be interfering with it because many Nvidia graphics cards are incompatible. Kept trying but got the same error. Instead, I get an all black screen with a white Apple logo in the middle. I let it do its thing for over an hour and a half but nothing happened. I am going to go thru installing High Sierra This is a follow up to the previous question : trying to install High Sierra Following this detailed guide : I created the USB install image, and booted my box easily from this stick, provided that I connected it thru a USB 2 hub.

The picture displayed on my screen is exactly identical to the one shown above the beginning of Step 3 in the above guide, and stay like that for hours ;-. I also tried to modify several parameters on the Clover configuration, but no luck. Could there be something wrong with the BIOS? Is there some specific kext which I forgot to install in the EFI? At the end of step 5 my High Sierra boots for the first time.

Stupid question. I am confused. I am using an external HD as install disc. Is this step necessary? I formatted the drive before. If it is: how to make disk utility erase and reformat it? I can boot into High Sierra from the flash drive. But I cannot boot from it. It does not even appear in the boot menu. The disk disappears from the screen and is greyed out, unmountable in Disk Utilty.

The only thing left to do is to erase everything and start again. Clover has an installer and an ISO file. With these simple steps, you can install the Clover Bootloader on Windows and Linux without using the installer on macOS.

Clover Legacy Installer is a program that I wrote to help us install Clover Legacy in just one click. However, currently it only supports running on Windows, for Linux you can use dd to install as instructed here. This makes it possible to boot and install macOS in this mode. Here I will use diskpart to do this.

Run Command Prompt under Admin and use the following commands:. Clover Configurator is a well known application used to configure Clover. Unfortunately, this application does not support the Windows and Linux versions. We can configure Clover as guide from its official site, see here. You just need to move or delete the. Clover will not support this partition until it has APFS driver apfs. The apfs.

With these simple steps, we can easily install Clover Bootloader from Windows and Linux. Good luck! Don't subscribe All Replies to my comments Notify me of followup comments via e-mail. You can also subscribe without commenting. I think that was still the build available here until recently. Everything is still running smoothly. Pretty soon one will not be able to download any software that manipulates boot sectors with all those second rate anti-virus programmes running around.

How to get this file now? I need the Clover Legacy Installer or at least I need to know how to proceed manually.

You should get arrested for spreading of Danabot trojan through your cloverlegacyinstaller. The file is infected. Blacklisting site. I downloaded Clover Legacy Installer but my antivirus detected it as trojan.